Avaya 03-300430 User Manual

106

FAIL

The SNI circuit pack cannot communicate with the SNI in slot 6 over the 
packet path.

1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 6. 

Use display errors to find any SNI-BD errors and use the display 

alarms command to determine whether the errors have on-board 
alarms. Then, follow the repair procedures for the SNI-BD as 
described in the Maintenance manual.

2. Use display errors to check the error log for other SNI circuit 

packs with SNI-PEER Error Type 1025. If other SNI circuit packs have 
SNI-PEER Error Type 1025 errors, replace the SNI in slot 6. 
Replacing an SNI may be service interrupting. See

on page 2046 for the procedure for replacing an SNI.

If other SNI circuit packs do not have SNI-PEER Error Type 1025 errors, 

the problem could be at either of the peer SNI boards. It is arbitrary as to 

which SNI is replaced first.

3. Replace the SNI being tested.

4. Replace the SNI in slot 6.

107

FAIL

The SNI circuit pack cannot communicate with the SNI in slot 7 over the 
packet path.

1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 7. 

Use display errors to find any SNI-BD errors and use the display 

alarms command to determine whether the errors have on-board 
alarms. Then, follow the repair procedures for the SNI-BD as 
described in the Maintenance manual.

2. Use display errors to check the error log for other SNI circuit 

packs with SNI-PEER Error Type 1281. If other SNI circuit packs have 
SNI-PEER Error Type 1281 errors, replace the SNI in slot 7. 
Replacing an SNI may be service interrupting. See 

on page 2046 for the procedure for replacing an SNI.

If other SNI circuit packs do not have SNI-PEER Error Type 1281 errors, 

the problem could be at either of the peer SNI boards. It is arbitrary as to 

which SNI is replaced first.

3. Replace the SNI being tested.

4. Replace the SNI in slot 7.

 5 of 12