Avaya 03-300430 User Manual

1000

ABRT

System resources required to run this test are not available. The 
port may be busy with a valid call.

1. Use display port location to determine the station 

extension or trunk group/member number of the port. Use 
status bri-port location to determine the service state 

of the port. If the service state indicates that the port is in use, 
then the port is unavailable for certain tests. Wait until the port is 
idle before retesting.

2. If the port status is idle, then retry the command at 1-minute 

intervals up to 5 times.

1004

ABRT

The port has been seized by a user for a valid call. Use status 
bri-port location to determine when the port is available for 

testing.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort and the port is idle, escalate the 

problem.

1005

ABRT

This test is not valid for this type of translation. Ports administered as 

“ASAI” or “ADJK” cannot run this test, because the B channels 

associated with the port are not used by ASAI or Avaya Adjunct 

Links. This is a normal condition.

 / 

:

1412

ABRT

This test does not execute on a G700 media gateway.

2012

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

1, 2

FAIL

The NPE of the tested port was found to be transmitting in error, 
causing noisy and unreliable connections. Error code 1 indicates 
that the BRI NPE Crosstalk test failed on Channel B1. Error code 2 
indicates that the BRI NPE Crosstalk test failed on Channel B2.

1. Replace circuit pack.

 1 of 2