Avaya 03-300430 User Manual

2000

ABRT

Response to the test was not received from the BRI-TRUNK circuit 
pack within the allowable time period.

1. If this result occurs repeatedly, try to reset the circuit pack with 

busyout board location and reset board location if 

other ports on the board are idle.

2. If this result occurs again, replace the circuit pack.

2012

ABRT

Internal system error

2100

ABRT

Could not allocate the necessary resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2103

ABRT

The system could not make the conference connection for the test.

1. Retry the command at 1-minute intervals up to 5 times.

1, 2

FAIL

The TDM Looparound failed on one of the channels.

●

Error Code 1 — TDM Loop Around test failed on B1.

●

Error Code 2 — TDM Loop Around test failed on B2.

7, 8

FAIL

The Conference Circuit test failed on a B channel.

●

Error Code 7 — test failed on B1

●

Error Code 8 — test failed on B2.

1. If the test fails repeatedly, try to reset the circuit pack with 

busyout board location, reset board location, and 

then release board location if other ports on the board 

are idle.

2. If the test fails again, replace the circuit pack.

PASS

The BRI Port Local TDM Loop Around test passed.

 2 of 2