Avaya 03-300430 User Manual

This test is nondestructive.
Slips occur when the transmitter and receiver are not running at precisely the same clock rate. 
The BRI Slip Query test polls the total number of slips that have occurred on a link.
When the TN2185 circuit pack detects a slip condition, maintenance software initiates the BRI 
Slip Query test to query the slip counters on the TN2185 circuit pack.
If the slip count is over the threshold, a MINOR alarm is raised against the TN2185 circuit pack, 
leaving every port of the TN2185 circuit pack in the in-service state. If the TN2185 circuit pack is 
used to supply the system synchronization source, the MINOR alarm will initiate a 
synchronization source switch. See 

on page 2237 and 

on page 2143 for additional information.

 ABRT

Internal 

system 

error

1. Retry the command at 1-minute intervals up to 5 times.

2000

ABRT

Response to the test request was not received within the allowable 

time period. If Error Type 1538 is present in the Error Log, follow the 

maintenance strategy recommended for this Error Type.

2012

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

 1 of 2