Avaya 03-300430 User Manual

This test is nondestructive.
This test is used to check the application layer communications across the in-service ISDN 
D-Channel. The test passes if a status enquiry message is successfully sent, fails if the 
signaling link is down, and aborts if a query is already running or there is an internal error.

1005

ABRT

The test aborted due to a configuration problem. This test may not be 

applicable, or it may be disruptive to terminal equipment other than a voice 

terminal (for example, a modem pool member or Music on Hold). This error 

can be ignored.

1019

ABRT

Test is already running.

1113

ABRT

The signaling link is down.

1. Use the test port GGGVSpp long command to clear any errors 

which prevent establishment of the signaling link.

2. Examine the results of Test #626, which is executed with the command. 

If this test aborts or fails, follow the repair procedure for the Signaling 
Link Status Test.

3. Escalate problem if BRI Layer 3 Query Test continues to abort.

1139

ABRT

The Packet Bus in the port network is out-of-service.

1. Follow the repair procedures for the Packet Bus.

2. After completing Step 1, execute the test port GGGVSpp command 

and review the results of the BRI Port Local LAN Looparound Test to 
verify the repair.

1141

ABRT

The PKT-CTRL is out-of-service.

1. Consult the repair procedure for PKT-CTRL.

2. If Step 1 does not resolve the problem, escalate to the next tier.

1144

ABRT

The Processor Port Network Packet Bus is out-of-service.

1. Follow the repair procedures for the Packet Bus.

2. After completing Step 1, execute the test port GGGVSpp long 

command and review the results of the BRI Port Local LAN Looparound 
Test to verify the repair.

 1 of 2