Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
2322 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
1004
ABRT
The port has been seized by a user for a valid call. Use status trunk to 
determine when the port is available for testing.
1. Retry the command at 1-minute intervals up to 5 times.
1005
ABRT
Trunk has been administered as incoming-only; transmission tests can only 
be run on outgoing trunks.
1115
ABRT
The near end test line on the TN771 circuit pack could not be allocated.
1. Verify that the TN771 circuit pack is in service and that port 1 is 
administered and in service with status port.
2. Retry the command at 1-minute intervals up to 5 times.
1900
ABRT
The test completion message was not received from the TN771 circuit 
pack.
1. Test the TN771 circuit packs.
1901
ABRT
This error occurs when the TN771 circuit pack uplinks a message that is 
not the proper response for this test. The anticipated uplink messages are 
seize, ring or answer.
1. Verify that the Trunk is administered properly.
1905
ABRT
Intercept tone detected from far end.
1. Get the test line data and verify it with the far end. Dial the test number 
manually to see if the TTL is reached. If it is not, then either the number 
is wrong, or the far end is administered incorrectly.
1906
ABRT
Reorder tone detected from far end.
1. See actions for Error Code 1905.
1907
ABRT
Other unexpected tone detected from far end.
1. See actions for Error Code 1905.
1913
ABRT
Audible Ring detected from far end.
1. See actions for Error Code 1905.
1914
ABRT
Unidentified interrupted tone detected from far end.
1. See actions for Error Code 1905
Table 834: Test #844-848 Transmission Test  (continued)
Error
Code
Test
Result
Description / Recommendation
 2 of 5