Avaya 03-300430 User Manual
TONE-BD (Tone-Clock Circuit)
Issue 1 June 2005
2329
Figure 139: S8700 IP Connect Duplex Reliability Configuration
Figure notes:
1.
S8700 Media Server 1 - two are always
present, one in a active mode and the other
on standby.
6.
Ethernet Switch - A device that provides for
port multiplication by having more than one
network segment. In an IP Connect
environment, the Ethernet Switch should
support 802.1 ip/Q, VLAN and 10/100 mbps.
2.
S8700 Media Server 2 - two are always
present, one in a active mode and the other
on standby.
7.
UPS units - two required.
3.
Duplication Interface - The Ethernet
connection between the two S8700 Media
Servers.
8.
Port Network - optional configuration of Media
Gateways that provides increased switch
capacity.
4.
Services Interface - The S8700 Media
Servers dedicated Ethernet connection to a
laptop. This link is active only during on-site
administration or maintenance and the
services interface can link to the non-active
server through a telnet session.
9.
IPSI - provides transport of CCMS messages
over IP allowing the S8700 Media Server to
communicate with the Port Networks.
5.
Connection from the Servers to the
Ethernet Switch.
10.
Customer LAN
cydsdup KLC 042204
1
1
2
2
IPSI
IPSI
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
100bT
LINK
TRMT
RCV
BBI
LINK
TRMT
RCV
IPSI
Ethernet 1
Ethernet 1
Ethernet 0
Ethernet 1
1
2
3
4
4
5
6
6
7
PN 1
8
PN 2
8
PN
8
9
9
9
10
10
10