Avaya 03-300430 User Manual

1146

ABRT

The congestion just occurred in the network.

1. Enter status tsc-administered at 1-minute intervals up to 3 

times.

2. If congestion does not clear, disable and enable the Administered TSC 

using change signaling-group grp#.
NOTE: To disable the Administered TSC, display the Signaling Group 
administration screen using change signaling-group grp#, 

where grp# is the number of the signaling group under which the 

suspect TSC is administered. Set the Enable field to n. To enable the 
ADM TSC, set the Enable field to y.

3. If congestion still does not clear, check the other nodes in the network.

1147

ABRT

The ADM TSC is being torn down.

1. Enter status tsc-administered at 1-minute intervals up to 3 

times.

2. If ADM TSC is still down, disable and enable the ADM TSC using 

change signaling-group grp#.

NOTE: To disable the ADM TSC, display the Signaling Group 
administration screen using change signaling-group grp#, 

where grp# refers to the number of the signaling group under which 

the suspect TSC is administered. Set the Enable field to n. To enable 
the ADM TSC, set the Enable field to y.

3. If the ADM TSC is still down, check the other nodes in the network.

1148

ABRT

The ADM TSC is enabled, but inactive (near end).

1. Disable and enable the ADM TSC.

2. Execute test tsc-administered.
3. If the ADM TSC is still inactive, check the other nodes in the network.

1149

ABRT

The ADM TSC is disabled.

1. Enable the TSC, and see if the status indicates active.

2. Execute test tsc-administered.
3. If the TSC still disabled, remove the ADM TSC from the system.

 2 of 4