Avaya 03-300430 User Manual

aa. Error Type 3842: bad translation RAM location found error. This error is not 

service-affecting. No action is required. A Bad Translation RAM is detected, but the call 
continues by using another translation location.

ab. Error Type 3843: LAN Receive Parity Error. This error occurs when the circuit pack detects 

an error in a received frame from the Packet bus. These errors are most likely caused by a 
Packet bus problem, but may be due to a circuit pack fault.

on page 1799 to determine whether the problem is isolated 

to this circuit pack or is caused by Packet bus faults.

ac. Error Type 3900: provides status information about a CPE Loop-Back Jack test. The value 

in the Aux Data field indicates the status of the loop-back test.

ad. Error Type 3901: provides status information about a Far CSU Loopback test. The value in 

the Aux Data field indicates the status of the loop-back test.

ae. Error Type 3902: provides status information about a One-Way Span test. The value in the 

Aux Data field indicates the status of the span test.

1

Test is currently running

2

Failed because loop back could not be activated

3

Failed because test pattern could not be detected

4

Test has been terminated

1

Test is currently running

2

Failed because loop back could not be activated

3

Failed because test pattern could not be detected

4

Test has been terminated

1

Test is currently running

2

Failed because test could not be activated

3

Test pattern was not received from the far end

4

Test has been terminated