Avaya 03-300430 User Manual
VAL-BD (Voice Announcements over LAN Circuit Pack)
Issue 1 June 2005
2481
Amber
On solid
Firmware is self-downloading to the circuit pack.
!
CAUTION:
CAUTION:
You can lose the resident firmware image file if you
reset the circuit pack during firmware download. If
this happens, FTP a new firmware image file to the
VAL circuit pack and perform the Firmware download
procedure again.
reset the circuit pack during firmware download. If
this happens, FTP a new firmware image file to the
VAL circuit pack and perform the Firmware download
procedure again.
Amber
Fast flash
(100 ms on/
100 ms off)
Occurs during circuit pack insertion or circuit pack reset which the
announcement files are being copied from FLASH to RAM. If you
reset the circuit pack during this time, your announcement files
remain intact.
Amber
Slow flash
(200 ms on/
200 ms off)
Flashes during autosave while copying announcement files from
RAM to FLASH.
!
CAUTION:
CAUTION:
You can lose the announcements on the circuit pack
if you reset it during an autosave.
if you reset it during an autosave.
LINK
On/off
Active Ethernet link
TRMT
Intermittent
Transmit
RCV
Intermittent
Receive
100M
On/off
Off = 10-Mbps Ethernet connection
On = 100-Mbps Ethernet connection
FDX
On/off
Off = half-duplex connection
On = full-duplex connection
COL
On/off
Off = no collisions detected
On = collisions detected
Table 877: TN2501AP LEDs (continued)
LED
Behavior
Description
2 of 2