Avaya 03-300430 User Manual

2012

ABRT

Could not allocate the necessary system resources to run test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the problem persists, escalate the problem.

2100

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the problem persists, escalate the problem.

1

FAIL

The buffer level is nearly exhausted.

2

FAIL

The VAL is congested, and no buffers are available.

1. Retry command at 1-minute intervals up to 5 times.

2. If command continues to fail, examine the VAL port measurements to 

determine which ports are heavily utilized and the processor 
occupancy of the circuit pack.

A Low processor occupancy when VAL is congested indicates circuit pack 
failure.

1. If the problem persists, reset the circuit pack (reset board 

location).

2. If congestion recurs, replace the circuit pack.

High processor occupancy indicates the VAL is congested due to traffic 

load.

●

To relieve congestion in the short term, selectively busyout ports 
(busyout port location) on the VAL circuit pack.

●

To achieve a more permanent resolution, it could be necessary 
reassign announcements to other integrated announcement circuit 
packs.

Consider replacing affected VAL ports with new ports.

3

FAIL

The VAL circuit pack is not operating normally and is congested.

PASS

Hardware setting and attached cable type match VAL circuit pack 

administration. The circuit pack detects no errors.

 2 of 2