Avaya 03-300430 User Manual

2. See 

on page 2507 repair procedures 

to verify repair.

3. Clear the alarm (test port location long clear).

d. Error Type 3585: TDM Port Loop-Around Test (#1285) failed.

1. Test the port (test port location long).
2. See the 

 repair procedure.

Investigate tests in the order presented below. Clearing Error Codes associated with the one 
test may also clear errors generated from other tests in the sequence.

This test is destructive.

Note:

: On the G700, this test aborts with Error Code 1412.

This test verifies whether the VAL port can send and receive data on the TDM bus. This test has 
a tone generator send tones on a timeslot, and it has a tone receiver receive tones on another 
timeslot. The tones are looped through the record/playback port.

1. D = Destructive, ND = Nondestructive

TDM Loop-Around Test (#1285)

: this test aborts with Error Code 1412.

X

D

SCOTCH Synchronous Loop-Around Test (#1275)

: this test aborts with Error Code 1412.

X

D

Match the tones sent

The test passes.

Do not match the tones sent

The test fails.