Avaya 03-300430 User Manual

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

1000

ABRT

System resources required to run this test are not available. The port may 

be in use on a valid call. Use status access-endpoint extension to 

determine when the port is available for testing.

1004

ABRT

The port has been seized by a user for a valid call. Use status 
access-endpoint extension to determine when the port is available 

for testing. The port is available when it is in the in-service/idle state.

1. Retry the command at 1-minute intervals up to 5 times.

1020

ABRT

The test did not run due to a previously existing error on the specific port or 
because of a more general circuit pack error.

1. Examine the Error Log for existing errors against this port or circuit 

pack, and attempt to diagnose the previously existing error.

:

1412

ABRT

On the G700, this test aborts with Error Code 1412.

2000

ABRT

Response to the test was not received within the allowable time period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

FAIL

The NPE of the tested port did not conference the tones correctly. This 
causes noisy and unreliable connections. Even though wideband calls do 
not use the conferencing feature on the NPE, this failure indicates 
problems with the circuit pack hardware.

1. Replace the circuit pack.

PASS

The port can correctly conference multiple connections.

1. Investigate user-reported troubles on this port using other port tests 

and by examining the terminal adapter or external wiring.