Avaya 03-300430 User Manual

Any

NO 

BOARD

The test could not relate the internal ID to the port (no board). 
This could be due to incorrect translations, no board is inserted, 
an incorrect board is inserted, or an insane board is inserted.

1. Ensure that the board translations are correct. Execute the 

add ds1 location command to administer the board 

interface if it is not already administered.

2. If the board was already administered correctly, check the 

error log to determine whether the board is hyperactive. If 
this is the case, the board is shut down. Reseating the 
board will re-initialize the board.

3. If the board was found to be correctly inserted in step 1, 

then enter the busyout board location.

4. Enter the reset board location.
5. Enter the release board location.
6. Enter the test board location long.

This should re-establish the linkage between the internal ID and 

the port.

 2 of 2