Avaya 03-300430 User Manual

Communication Manager Maintenance-Object Repair Procedures

2544 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers

Error Log Entries and Test to Clear Values

Notes:

a. Error Type 1: the circuit pack or media module stopped functioning or has been physically

removed from the system. This Error Type does not apply to ANN-BD, DETR-BD,
S-SYN-BD, M/T-BD, or CLSFY-BD. The alarm is logged approximately 11 minutes after
removal of the circuit pack or failure of the SAKI Sanity Test (#53).

Check for the physical presence of the circuit pack or media module in the slot indicated by
the alarm. If the circuit pack or media module is absent, insert one of the proper type. If the
circuit pack or media module is present and its red LED is lit, see

LED alarms without Alarm

Log entry or with Error Type 1

on page 258.

Table 907: Common Port Circuit Pack Maintenance Error Log Entries

Error
Type

Aux
Data

Associated Test

Alarm
Level

On/Off
Board

Test to Clear Value

1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each

appropriate test’s description, and follow its recommended procedures.