Avaya 03-300430 User Manual

To test the server LEDs:

1. On the main menu, under Diagnostics, click Test Server LEDs.
2. On the Test Server LEDs screen, click Test LEDs.
3. Observe the Active/Standby LED on your server and the transmit LED on your duplication 

card to ensure they are blinking.

An abnormal condition is indicated if an LED shows any of the following flashing patterns.

If the server is hung, you do not need to do anything. It should automatically reboot and fix itself. 
If the server does not reboot itself, power it down and then reboot it.
If an LED is clearly stuck or has a burned out element, ignore the indicators until you can 
conveniently replace the server.

Flashes red 

The green element is either burned out or not controlled.

Flashes green

The red element is either burned out or not controlled.

Flashes between red

and amber

The green element is stuck on.

Flashes between green

and amber

The red element is stuck on.

Stays amber continuously Either the server is hung or the LED controller is stuck.

Stays off continuously

The server is hung or powered off, the controller is stuck, or the 

server is using a new or different LED controller.