Avaya 03-300430 User Manual

LEDs are important status indicators for technicians during on-site installation, maintenance, 
troubleshooting, and repair. They encompass three major areas: Alarms, Testing, and Usage 
Activity. Some LEDs are specialized to support specific procedures (such as removing the 
S8300 Media Server). When alarms or problems occur, LEDs are present to indicate that 
attention by a technician is needed.
LEDs appear on the G700 LED panel, and each Media Module. The G700 LEDs are the same 
as those on the Avaya Cajun P330, with the following exceptions:

●

Slight modifications to two of the LEDs (OPR and SYS)

●

Addition of the Alarm LED to the LED Panel to display prominently any error condition

See “Table 2-1: Avaya P333T LED Description, in the "Avaya P333T User’s Guide" for a 
complete listing of LEDs.
Some Media Modules have additional LEDs, although each Media Module has the three 
standard LED. 

on page 288 indicates the meanings associated 

with standard DEFINITY server LEDs. Although in some cases these LEDs have been 
augmented or modified for the S8300 Media Server and G700 Media Gateway, it is important to 
be aware of their standard meanings when viewing the system.

Note:

The four multi-color specialized status LEDs that have appeared on various 
DEFINITY server TN boards like the T1/E1/DS1 board (TN464) do not appear on 
the Media Modules.

Note:

LEDs can also be viewed using the embedded Device Manager on the L2 
Switching Processor; however, it displays LED position only, and does not 
indicate status. 

Red

Upon power-up or module insanity, this LED is turned on. Upon passing 

diagnostics, this LED is turned off.

Green

During power-up self testing and maintenance testing, this LED is turned on.

Yellow

This LED indicates that the module is in service.