Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
372 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
b. Error type 769 is a log only error and is displayed when Communication Manager does not 
receive a response from the AESVCS Server to a heartbeat message that was sent over 
the AESVCS Link. Failure to receive a response to a heartbeat message results in the 
deletion of the AESVCS Link by Communication Manager. Both an AESVCS Session Level 
and Link level error is generated against this condition. Escalate if the error persists.
c. Error type 1537 is a log only error and displayed when an AESVCS Link is deleted from an 
AESVCS Session for reasons other than a heartbeat failure. Both an AESVCS Session 
Level and Link level error is generated against this condition. The Aux Data field contains 
the reason code.
Aux Data
Description 
1
The far end closed the socket connection. Check the error logs on 
the AEVCS Server for more information.
100
The reset aecvcs-link command was used to close the socket 
connection 
101
The AESVCS Interface on the IP Services form was disabled.
102
The AESVCS Interface was removed from the IP Services form.
103
The AE Services Server was disabled on the AE Services 
Administration page of the IP Services form.
104
The AE Services Server was deleted on the AE Services 
Administration page of the IP Services form.
200
The socket connection closed due to an internal error. Escalate if the 
problem persists.
201
The socket connection was unexpectedly closed by Communication 
Manager. Escalate if the problem persists.
202
Communication Manager detected and error and closed the socket 
connection. Escalate if the problem persists.
203
Communication Manager detected an error reading from the socket 
and closed the connection. Escalate if the problem persists.
204
Communication Manager failed to write a complete message and 
closed the socket connection. Escalate if the problem persists.
205
AE Server established a new connection causing Communication 
Manager to close the existing one. Escalate if the problem persists.
206
Communication Manager failed to send a heartbeat request and 
closed the socket connection. Escalate if the problem persists.
207
Communication Manager detected a protocol violation and closed 
the socket connection. Escalate if the problem persists.
 1 of 2