Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
394 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
2000
ABRT
Response to the test request was not received within the allowable time 
period.
1. Retry the command at 1-minute intervals up to 5 times.
2100
ABRT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
FAIL
The port's battery feed chip is unable to supply sufficient power to the 
terminal equipment.  This could be a marginal test, and the terminal 
equipment may be operating satisfactorily.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to fail, determine whether the customer is 
experiencing problems on this line.  Replace the circuit pack only if the 
customer is experiencing problems.
PASS
The port’s battery feed chip is able to provide power to the station equipment 
to detect on-/off-hook, but may not be able to supply power for touch-tones.  
If touch-tones are inoperative on this station, then replace the circuit pack 
because this port is inoperative.  User-reported troubles on this port should 
be investigated by using other port tests, by examining station wiring, or by 
examining the station.
0
NO 
BOARD
The test could not relate the internal ID to the port (no board).  This could 
be due to incorrect translations, no board is inserted, an incorrect board is 
inserted, or an insane board is inserted.
1. Verify that the board’s translations are correct.  Enter list config
and resolve any problems.
2. If the board was found to be correctly inserted in step 1, enter busyout 
board
3. Enter reset board location
4. Enter release board location
5. Enter test board location long
This should re-establish the linkage between the internal ID and the port.  If 
not, verify that a valid board is inserted.
Table 115: Test #35 Battery Feed Test  (continued)
Error
Code
Test
Result
Description / Recommendation
 3 of 3