Avaya 03-300430 User Manual

1002

ABRT

The system could not allocate time slots for the test.  The system may be 
under heavy traffic conditions or it may have time slots out-of-service due 
to TDM-BUS errors.

1. If the system has no TDM-BUS errors and is not handling heavy 

traffic, retry the command at 1-minute intervals up to 5 times.

1003

ABRT

The system could not allocate a tone receiver for the test.  The system 
may be oversized for the number of Tone Detectors present, or some 
Tone Detectors may be out of service.

1. Resolve any TTR-LEV errors.

2. Resolve any TONE-PT errors.

3. If neither condition exists, retry the command at 1-minute intervals up 

to 5 times.

1004

ABRT

The port was seized by a valid call during the test. The test has been 
aborted.

1. Use display port location to determine the station extension. 

Use status station to determine the service state of the port. If 

the port is active, wait until it is idle.

2. Retry the command at 1-minute intervals up to 5 times.

1005

ABRT

This test is not run on ports administered as External Alert, Announcement 

or combined modem pool ports.  This error can be ignored.

1018

ABRT

The test has been disabled by administration. The default for the Test 
field on the station screen is y. Determine why this field was set to n on 
this station. It may be due to the ringing application Test #48, which can 
be customer or terminal disturbing.

1. To enable the test for the particular analog station being tested, enter 

2. Enter y in the Test field.

 2 of 4