Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
404 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
ANL-LINE (8-Port Analog Line)
Error log entries and tests also apply to ANL-NE-L (8-Port Analog Line).
S8700 | 8710
 / 
S8500
The 8-port Analog Line circuit packs,
each provide eight ports for single-line, on or off-premises analog endpoints such as analog 
voice terminals, queue warning level lamps, recorded announcements, dictation machines, 
PAGEPAC paging equipment, external alerting devices, modems, fax machines, and AUDIX 
voice ports.  Only the TN769 supports a neon message waiting lamp.
Note:
Note:
PAGEPAC™ is a registered trademark of Harris Corporation, Dracon Division.
Test #48 may cause some terminal equipment to ring briefly during daily maintenance, which 
may disturb the customer or the terminal equipment. Test #47 may cause a false alarm when 
the port is connected to certain off-premises equipment, non-voice terminal equipment, or loop 
equipment. In either case, the tests can be disabled by entering n in the Tests field on the 
change station extension screen. Be aware that this will disable Tests 6, 35, 47, and 48.
No maintenance of the terminal connected to the 8-Port Analog Line circuit pack or 8-Port Neon 
Analog Line circuit pack is performed, except to determine whether or not the terminal is 
connected. Failures of the common ringing application circuitry and the neon message waiting 
lamp power (ANL-NE-L only) are reported as errors 1281and 1793 against XXX-BD (Common 
Port Circuit Pack) in 
MO Name in Alarm 
Log
Alarm
Level
Initial Command To Run
Full Name of MO
ANL-LINE
MIN
test port location l
8-Port Analog Line
ANL-LINE
WRN
test port location sh
8-Port Analog Line
ANL-NE-L
MIN
test port location l
8-Port Neon Analog Line
ANL-NE-L
WRN
test port location sh
8-Port Neon Analog Line
TN712
TN411 [G3rV2]
TN742
TN443 [G3r V2]
TN769
TN443 [G3r V2]
TN467 [G3r V2]