Avaya 03-300430 User Manual

1000

ABRT

System resources are unavailable.  The port may be busy with a valid call.  
This result is also reported for the system’s Music-On-Hold port when it is 
off-hook, which it usually is.

1. Enter display port location to determine the station’s extension.
2. Enter status station extension to determine the service state of 

the port.

3. If the port is active, wait until it is idle.  Retry the command at 1-minute 

intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1001

ABRT

System resources required to run test are not available.  This could be due 
to a failure to seize the port.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1002

ABRT

The system could not allocate time slots for the test.  The system may be 
under heavy traffic conditions or have time slots out-of-service due to 
TDM-BUS errors.

1. Refer to TDM-BUS to diagnose any active TDM-BUS errors.

2. If the system has no TDM-BUS errors and is not handling heavy traffic, 

retry the command at 1-minute intervals up to 5 times.

3. If the test continues to abort, escalate the problem.

1003

ABRT

The system could not allocate a tone receiver for the test.  The system may 
be oversized for the number of Tone Detectors present or some Tone 
Detectors may be out-of-service.

1. Resolve any TTR-LEV errors in the Error Log.

2. Resolve any TONE-PT errors in the Error Log.

3. If neither condition exists, retry the command at 1-minute intervals up 

to 5 times.

4. If the test continues to abort, escalate the problem.

 2 of 4