Avaya 03-300430 User Manual

1018

ABRT

Administration has disabled the test.  The default for the Test field on the 
station form is y.  Determine why this field has been set to n on this station 
(this may be due to the ringing application Test #48, which can be 
disturbing to customer or terminal equipment).

1. To enable the test for a particular station being tested, enter change 

station extension.

2. Enter y in the Test field.

1392

ABRT

This port is currently a TTI port and the test does not execute on it.

1. Verify that the port is a TTI port:

●

Enter the display port location command (the display shows 

that the port is a TTI port).

●

Enter list configuration (the display shows a t for the port).

2. If both commands indicate that the port is a TTI port, the abort is 

correct for the test, and no action is necessary.

3. If either command indicates that the port is not a TTI port, escalate the 

problem.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

FAIL

The port's battery feed chip is unable to supply sufficient power to the 
terminal equipment.  This test result might be marginal, and the terminal 
equipment may be operating satisfactorily.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to fail, determine whether the customer is 

experiencing problems on this line.  Replace the circuit pack or media 
module only if the customer is experiencing problems.

 2 of 3