Avaya 03-300430 User Manual

This test applies momentary ringing voltage to the terminal equipment and monitors resulting 
current flow to determine whether terminal equipment is connected to the port.  This test may 
cause some terminal equipment to ring briefly during daily maintenance.  If this ringing disturbs 
the customer or the terminal equipment, you can disable it via the Tests field on the change 
station extension screen.  However, on some software releases, Tests #6, 7, 161, and 35 

also are disabled.

 / 

: In the G700, Tests #6, 7, and 161 abort with Error Code 1412.

ABRT

Necessary system resources could not be allocated to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1000

ABRT

System resources are unavailable.  The port may be busy with a valid call.  
This result is also reported for the system’s Music-On-Hold port when it is 
off-hook, which it usually is.

1. Enter display port location to determine the station’s 

extension.

2. Enter status station extension to determine the service state of 

the port.

3. If the port is active, wait until it is idle.  Retry the command at 1-minute 

intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1004

ABRT

A valid call seized the port during the test and aborted the test.

1. Use display port location  to determine the station extension.
2. Use status station extension to determine the service state of 

the port.

3. If the port is active, wait until it is idle before testing.  Retry the 

command at 1-minute intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1005

ABRT

This test was aborted due to a configuration problem.  The test is not 

applicable for this type of analog port.  This error can be ignored.

 1 of 3