Avaya 03-300430 User Manual

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

FAIL

The reflective loop-around test failed.  This could cause noisy or unreliable 
connections, or users calling this port may hear an echo.  The problem can 
also be off-board.

1. Since a line seizure may affect the test, repeat the test at 1-minute 

intervals up to 5 times.

2. Use test board location short to run circuit pack tests to check 

the Tone Generator and the Tone Detector circuits on the IPSIs or the 
Tone Generator/Tone Detector circuit packs.

3. Resolve any problems on the Tone Generator or the Tone Detector 

circuit.

4. If the Tone Generator and Tone Detector circuits are functioning 

properly, determine whether a voice terminal is connected and wired 
properly.  Resolve any problems found.

5. If the test still fails, replace the analog line circuit pack.

PASS

The port provides an analog transmission path to the station equipment.  

Investigate user-reported troubles on this port by running other port tests, by 

examining station wiring, or by inspecting the station.

 3 of 4