Avaya 03-300430 User Manual

1018

ABRT

Test call disabled

1. Set the Maintenance field on the Trunk Group screen to y.

1020

ABRT

TN230x circuit-pack problem

1. See 

1024

ABRT

Maintenance/Test digital port active

1. Wait until amber and green LEDs on the Maintenance/Test circuit pack 

are OFF.

2. Rerun the test.

3. If the problem persists, see 

1113

ABRT

Signaling link failed

1. Check the results of Test #255 (Signaling Link State Check test).

1116

ABRT

Switch could not change the service state

1. See if calls are active.  Run status trunk grp#/mem#.
2. If a call is active, proceed as for Error Code 1119.

If not, check the Error and Alarm Logs and see 

1117

ABRT

ISDN service message outstanding

1. Wait 2 minutes.  Then try again.

1118

ABRT

Far-end not administered

1. Check the administration of the far end of the ATM trunk.  Run status 

trunk grp#/mem#.

2. Try the test again.

1119

ABRT

Test call aborted, normal call attempted

1. Wait for the call to finish normally, or drop it by running busyout 

trunk grp#/mem#.

2. When the trunk is idle, retry the test.

 2 of 5