Avaya 03-300430 User Manual

3. Enter add atm pnc n (connection number), and administer the circuit pack location and 

ATM address.

4. Enter change system-parameters duplication, and change the Enable Operation 

of PNC Duplication field to y.

Note:

These systems are not equipped with PNC duplication.

1. Enter busyout atm pnc n (connection number).
2. Enter remove atm pnc n (connection number).

1. Enter status pnc, and ensure that the A-PNC is active.

If not, request a PNC interchange using the reset pnc interchange command.

2. Enter busyout pnc-standby.
3. Enter change system-parameters duplication, and change the Enable Operation 

of PNC Duplication field to n.

4. Enter busyout atm pnc n (PN’s number).
5. Enter remove atm pnc n (PN’s number) to remove both ATM-EI boards, or enter change 

atm pnc to remove the B-side ATM-EI board.

6. Enter change system-parameters duplication, and change the Enable Operation 

of PNC Duplication field to y.

Note:

These systems are not equipped with PNC duplication.

1. Remove the ATM PNC connection (see 

2. Add an ATM PNC connection (see 

on page 528).

1. Remove the ATM PNC connection (see 

2. Add an ATM PNC connection (see 

on page 528).