Avaya 03-300430 User Manual

None

ABRT 

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort escalate the problem.

2000

ABRT

Did not receive the SANITY response in the given time.

1. Wait for 5 minutes and see if board is visible to the system by using 

list config all.

2. If the board is visible, run the test again.  If same abort code results, 

escalate the problem.

3. If the board is not visible to the system with list configuration 

all, reseat the board.

4. If the board is still not recognized by the system, replace the board.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error

1. Try to reset the board again.

1

FAIL

The circuit pack failed to reset.

2

FAIL

The circuit pack failed to restart.

1. Execute command again.

2. If the problem persists, replace the circuit pack.

PASS

The ATM-EI circuit pack is successfully reset.

1. If status port-network still indicates that this link is down, it is 

possible that one or both of the ATM-EI circuit packs are busied out.

2. If the links do not come up after reset, review the error logs and take 

appropriate diagnostic action.

 2 of 2