Avaya 03-300430 User Manual

1132

ABRT

Internal system error.  The port location for the D channel is not known.  
This condition should not be possible since an administered ATM circuit 
pack must be specified when a Signaling Group is administered:

1. Retry the command at 1-minute intervals up to five times.

1134

ABRT

Internal system error.  The associated ATM circuit pack is not administered.  
This condition should not be possible, since an administered ATM circuit 
pack must be specified when administering a Signaling Group.

1. Retry the command at 1-minute intervals up to three times.

2500

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to five times.

1

FAIL

Layer 2 of the signaling channel is down.

1. Examine the results of the Signaling test (#636), and follow 

recommendations provided there.

2. If Test #636 (Primary Signaling Link Hardware Check) passes, the 

Layer 2 Query test may still fail if the signaling channel at the far end 
has not been administered correctly or if the signaling channel has 
been busied out.

3. Verify that the far-end signaling channel (D channel) has been 

administered correctly.

4. Verify that the ATM-DCH port used for the D channel has not been 

busied out at the far end.

3

FAIL

The D channel is down.

1. Examine the results of the Primary Signaling Link Hardware Check 

(#636) and follow recommendations provided there.

2. If Test #636 (Primary Signaling Link Hardware Check) passes, the 

Layer 2 Query test may still fail if the signaling channel at the far end 
has not been administered correctly or if the signaling channel has 
been busied out.

3. Verify that the far-end signaling channel (D channel) has been 

administered correctly.

4. Verify that the far-end ATM-DCH ports used for the Primary and 

Secondary D channels have not been busied out.

PASS

The Primary signaling channel is up.