Avaya 03-300430 User Manual

The test aborts if the ATM-TRK circuit pack is supplying synchronization.

1005

ABRT

Wrong circuit pack configuration to run this test.  The ATM CES 
Trunk Interface circuit pack provides timing for the system and 
cannot be reset without major system disruptions.

1. Set synchronization to another ATM CES trunk circuit pack 

or to the Tone-Clock circuit pack and test again.

1015

ABRT

Test cannot be run because the ATM-TRK circuit pack has not 
been busied out.

1. Busyout out the circuit pack (busyout board location).
2. Repeat the test (test board location long).

None

ABRT 

Could not allocate the required system resources

1. Retry the command up to 5 times at 1-minute intervals.

2. If the test continues to abort escalate the problem.

2000

ABRT

Sanity test timed out.

1. Wait 5 minutes.  Then see if ATM-TRK circuit pack is visible 

to the system by running list configuration all.

2. If the ATM-TRK circuit pack is visible (list 

configuration all), run the test again, and escalate if 

the problem recurs.

3. If the ATM-TRK circuit pack is not visible to the system (list 

configuration all), re-seat the ATM-TRK circuit pack, 

and retest.

4. If the ATM-TRK circuit pack is still not recognized by the 

system, replace the board.

2100

ABRT

Could not allocate required system resources

1. Retry the command up to 5 times at 1-minute intervals.

2500

ABRT

Internal system error

1. Try to reset the circuit pack with reset board location.

 1 of 2