Avaya 03-300430 User Manual

1

FAIL

Test tone not detected over the loop around; packet-path test aborted.

1. Test the active Tone-Clock in the PN, and verify that a tone is reaching 

the ATM-TRK circuit pack.  If not, correct the condition.

2. Run test board location long.
3. If the test continues to fail, replace the ATM-TRK circuit pack or 

transceiver.

4.  Rerun test board location long.

2

FAIL

TN1655 Packet Interface circuit pack could not detect the correct data 
packet.

1. Test the TN1655 Packet Interface circuit pack to verify that it is 

functioning properly.  If not, correct the condition.

2. Run display errors, and perform the repairs associated with 

DS1C-BD errors, if applicable.

3. Run display alarms, and perform the repairs associated with 

DS1C-BD alarms, if applicable.

4. Run test board location long.
5. If this test continues to fail, replace the ATM-TRK circuit pack.

6. Run test board location long.

3

FAIL

Distorted tone returned

1. Test the active Tone-Clock in the PN, and verify that a tone is reaching 

the ATM-TRK circuit pack.  If not, correct the condition.

2. Run test board location long.
3. If the test continues to fail, replace the ATM-TRK circuit pack.

4. Run test board location long.

4

FAIL

Unable to create TDM-path loop.

1. Retry the command up to 3 times at 1-minute intervals.

2. If this test continues to fail, replace the ATM-TRK circuit pack.

3. Run test board location long.

 3 of 4