Avaya 03-300430 User Manual

2000

ABRT

Response to the test was not received from the circuit pack within the 
allowable time period.

1. If the test aborts repeatedly up to five times, reset the circuit pack via 

busyout board location and reset board location.

2. If the test aborts again, replace the circuit pack.

2012

ABRT

Internal system error.

2100

ABRT

Could not allocate necessary system resources to run test.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to fail, escalate the problem.

value

FAIL

The BRI-LINE circuit pack is still detecting errors of this type.  The Error 
Code field contains the value of this counter.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to fail, review the results of other tests in the long 

test sequence.  Pay particular attention to the results of the Level 1 
Status Inquiry test.  Follow repair procedures for any of the executed 
tests if they fail.  Otherwise, go to the next step.

3. If the tests for the endpoints or adjunct pass and the Layer 1 

Transmission Error Counter test continues to fail, check the wiring to 
the endpoints or adjunct.  If the wiring appears to be fine, escalate the 
problem.

PASS

The Layer 1 Transmission error counter was read correctly and has a value 

of 0.