Avaya 03-300430 User Manual

This test is nondestructive.  When the C-LAN circuit pack detects a parity error with a received 
frame, it increments the PPE/LANBIC Receive Parity error counter.  This test reads and clears 
the counter, and may verify repair of problem.
Errors may indicate a problem with:

●

This circuit pack

●

A packet bus

●

Another circuit pack on the bus

2000

ABRT

Did not receive circuit pack test response within the allowable time period.

1. Retry command at 1-minute intervals up to 5 times.

2. If the problem persists, reset the circuit pack with reset board 

location.

3. If the problem persists, replace the circuit pack.

2100

ABRT

Could not allocate the necessary system resources to run test.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the problem persists, escalate the problem.

1–10

FAIL

Circuit pack detects parity errors.  The Error Code indicates the value of the 
on-board error counter.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to fail, execute Packet Interface test (#598) (test 

board location).

3. If Packet Interface test (#598) fails, see packet-bus repair procedures.

PASS

Circuit pack detects no errors.