Avaya 03-300430 User Manual
CO-TRK (Analog CO Trunk)
Issue 1 June 2005
847
1000
ABRT
System resources required to run this test are not available. The port may
be busy with a valid call.
be busy with a valid call.
1. Use display port location to determine the trunk group/member
number of the port. Use status trunk to determine the service state
of the port. If the service state indicates that the port is active, then it is
unavailable for certain tests. Wait until the port is idle before retesting.
unavailable for certain tests. Wait until the port is idle before retesting.
2. If the port status is idle, retry the command at 1-minute intervals up to 5
times.
1004
ABRT
The port was seized by a user for a valid call.
1. Use display port location to determine the trunk group/member
number of the port. Use status trunk to determine the service state
of the port. If the service state indicates that the port is active, then it is
unavailable for certain tests. Wait until the port is idle before retesting.
unavailable for certain tests. Wait until the port is idle before retesting.
2. If the port status is idle, retry the command at 1-minute intervals up to 5
times.
1005
ABRT
Test inapplicable to present configuration. This is a normal condition.
1018
ABRT
Test has been disabled by administration.
1. For this test to run, the Maintenance Tests field on the Trunk Group
form must be n. Use change trunk-group <grp> to check the
field.
2000
ABRT
Response to the test was not received within the allowable time period.
1. Retry the command at 1-minute intervals up to 5 times.
Table 289: Test #3 CO Demand Diagnostic Test (continued)
Error
Code
Code
Test
Result
Result
Description / Recommendation
2 of 4