Avaya 03-300430 User Manual

1392

ABRT

This port is currently a TTI port and the test will not execute on it.

1. Verify that the port is a TTI port using either display port (the 

display shows that the port is a TTI port) or list config (the display 

shows a “t” for the port).

2. If either list config or display port indicates that the port is not 

a TTI port, escalate the problem. If both commands indicate that the 
port is a TTI port, the abort is correct for the test, and no action is 
necessary.

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2. Escalate the problem if the test continues to abort.

2003

ABRT

Failed to receive an off-hook from the Data Line.

1. Retry the command at 1-minute intervals a maximum of 5 times.

2004

ABRT

Off hook was not received from the data line device.

1. Busyout the digital port being tested on the data line circuit pack. Retry 

the command at 1-minute intervals up to 5 times.

2. If the test still aborts, replace the circuit pack.

2005

ABRT

The handshake between the Maintenance/Test circuit pack digital port and 
the data line port failed.

1. Resolve any M/T-DIG errors.

2. Retry the command at 1-minute intervals up to 5 times.

3. If the test still aborts, replace the data line circuit pack.

 2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals a maximum of 5 times.

2312

ABRT

Test did not finish, did not receive loop back data.

1. Resolve any M/T-DIG errors.

2. Retry the test, if still aborts, replace the Data Line circuit pack.

 3 of 4