Avaya 03-300430 User Manual

This test sends updates of the DID port translation for every port on the circuit pack or media 
module that has been translated. The update is non-disruptive and guards against possible 
corruption of translation data contained on the circuit pack or media module. No response 
message is expected from the circuit pack or media module once it receives translation 
updates. The port translation data includes:

●

Wink or immediate start trunk

●

Dial tone or rotary dialing trunk

●

Rotary dialing inter-digit timing

●

Network balance R/RC

●

Disconnect timing

0

NO 

BOARD

The test could not relate the internal ID to the port (no board).

1. Verify that the board’s translations are correct. Translate the board if 

necessary.

2. Enter busyout board location
3. Enter reset board location
4. Enter release board location
5. Enter test board location

This should re-establish the linkage between the internal ID and the 
port.

 3 of 3

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

 1 of 2