Intelligent Motion Systems Motion Detector User Manual

The drive systems described here are products for general use that conform to the 

state of the art in technology and are designed to prevent any dangers. However, 

drives and drive controllers that are not specifically designed for safety functions 

are not approved for applications where the functioning of the drive could endan-

ger persons. The possibility of unexpected or un-braked movements can never be 

totally excluded without additional safety equipment. For this reason personnel must 

never be in the danger zone of the drives unless additional suitable safety equip-

ment prevents any personal danger. This applies to operation of the machine during 

production and also to all service and maintenance work on drives and the machine. 

The machine design must ensure personal safety. Suitable measures for prevention 
of property damage are also required.

Only technicians who are familiar with and understand the contents of this manual 

and the other relevant documentation are authorized to work on and with this drive 

system. The technicians must be able to detect potential dangers that may be 

caused by setting parameters, changing parameter values and generally by the 

operation of mechanical, electrical and electronic equipment.

The technicians must have sufficient technical training, knowledge and experience 

to recognise and avoid dangers.

The technicians must be familiar with the relevant standards, regulations and safety 

regulations that must be observed when working on the drive system.

The drive systems described here are products for general use that conform to the 

state of the art in technology and are designed to prevent any dangers. However, 

drives and drive controllers that are not specifically designed for safety functions 

are not approved for applications where the functioning of the drive could endanger 

persons. The possibility of unexpected or unbraked movements can never be totally 

excluded without additional safety equipment.

For this reason personnel must never be in the danger zone of the drives unless 

additional suitable safety equipment prevents any personal danger. This applies to 

operation of the machine during production and also to all service and maintenance 

work on drives and the machine. The machine design must ensure personal safety. 

Suitable measures for prevention of property damage are also required.

In all cases the applicable safety regulations and the specified operating conditions, 

such as environmental conditions and specified technical data, must be observed.

The drive system must not be commissioned and operated until completion of instal-

lation in accordance with the EMC regulations and the specifications in this manual. 

To prevent personal injury and damage to property damaged drive systems must 

not be installed or operated.

Changes and modifications of the drive systems are not permitted and if made all no 

warranty and liability will be accepted.

The drive system must be operated only with the specified wiring and approved 

accessories. In general, use only original accessories and spare parts.

The drive systems must not be operated in an environment subject to explosion 
hazard (ex area).