Bosch LTC 9440 User Manual
4
TABLE OF CONTENTS
1
UNPACKING ............................................................ 4
2
SERVICE .................................................................... 4
3
INSTALLATION ...................................................... 4
3.1
Model Designation ................................................................................4
3.2
Recommended Mounting Equipment................................................5
3.3
Wall Mounting .......................................................................................5
3.4
Camera/Lens/Enclosure Mounting ....................................................5
3.5
Electrical Connections .........................................................................5
3.6
Grounding Connection........................................................................5
3.7
Connector Assembly............................................................................5
3.8
Pan Stops (345° Models) .....................................................................7
4
OPERATION............................................................. 7
4.1
Manual Pan Operation (345° Models) ..............................................7
4.2
Auto-Pan Operation (345º Models)..................................................7
4.3
Pan Stop Adjustment (345° Models) ................................................8
4.4
Pan Operation (360° Models) ............................................................8
4.5
Tilt Stop Adjustment (All Models) ....................................................8
4.6
Pre-Position Models .............................................................................8
5
WIRING DIAGRAMS............................................... 9
6
RECOMMENDED APPLICATIONS..................... 12
7
DIMENSIONAL OUTLINE ................................... 12
1 UNPACKING
This electro-mechanical equipment should be unpacked
carefully and handled with care.
carefully and handled with care.
Check for the following items:
• Model number of unit.
• 3/32-inch Allen wrench.
• Connector Kit 315 1232 001
If an item appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper. If any items
are missing, notify Bosch Security Systems.
• Model number of unit.
• 3/32-inch Allen wrench.
• Connector Kit 315 1232 001
If an item appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper. If any items
are missing, notify Bosch Security Systems.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
may be transported. Save it for possible future use.
2 SERVICE
If the unit ever needs repair service, the customer should
contact the nearest Bosch Security Systems, Inc. Service
Center for authorization to return and shipping instructions.
contact the nearest Bosch Security Systems, Inc. Service
Center for authorization to return and shipping instructions.
Service Centers
U.S.A.: 800-366-2283 or 408-956-3895
Fax: 800-366-1329 or 408-956-3896
Email: NationalServiceCenter@ca.slr.com
Canada: 514-738-2434
Europe, Middle East & Asia Pacific Regions
800-366-2283
For additional information, see
www.boschsecuritysystems.com
U.S.A.: 800-366-2283 or 408-956-3895
Fax: 800-366-1329 or 408-956-3896
Email: NationalServiceCenter@ca.slr.com
Canada: 514-738-2434
Europe, Middle East & Asia Pacific Regions
800-366-2283
For additional information, see
www.boschsecuritysystems.com
3 INSTALLATION
This installation should be made by a
qualified service person and conform to all
local codes.
qualified service person and conform to all
local codes.
Always disconnect power to unit at
controller prior to connecting or
disconnecting pan/tilt electrical connector.
Pan/tilt to be mounted away from
unauthorized access [3 meters (10 feet) high
minimum]
controller prior to connecting or
disconnecting pan/tilt electrical connector.
Pan/tilt to be mounted away from
unauthorized access [3 meters (10 feet) high
minimum]
These units are designed for either upright or
inverted installations. To maintain
weatherproof integrity when mounting
outdoors in an inverted position, the unit
must be installed in a weatherproof
enclosure (e.g., weather-proof domed
housing) or a protected outside area.
inverted installations. To maintain
weatherproof integrity when mounting
outdoors in an inverted position, the unit
must be installed in a weatherproof
enclosure (e.g., weather-proof domed
housing) or a protected outside area.
Pan/tilts and associated equipment should be tested prior to
field installation to verify proper wiring and operation of
components.
field installation to verify proper wiring and operation of
components.
LTC 9418 & LTC 9420
The maximum load is 10kg (22lb) or 149kg-cm (129lb-in)
torque at a distance of 63.5mm (2.5in) from the center of
mass of the camera/lens/housing assembly to the center of
the tilt table.
torque at a distance of 63.5mm (2.5in) from the center of
mass of the camera/lens/housing assembly to the center of
the tilt table.
LTC 9440 & LTC 9441
The maximun load is 18kg (40lb) or 297kg-cm (260lb-in)
torque with center of mass located 3.12in (79.2mm) from the
center of the tilt table.
The combined weight of the enclosure/camera/lens should be
centered equally, front to back, on the tilt table surface for
best pan/tilt operation.
torque with center of mass located 3.12in (79.2mm) from the
center of the tilt table.
The combined weight of the enclosure/camera/lens should be
centered equally, front to back, on the tilt table surface for
best pan/tilt operation.
See RECOMMENDED APPLICATIONS.
3.1 Model
Designation
LTC 9418 Series Load Rating:
22lb Load (10Kg), 129lb-in (149kg-cm) torque
Wiring: Standard
Power Required: 24W
LTC 9420 Series Load Rating:
22lb Load (10Kg), 129lb-in (149kg-cm) torque
Wiring: Feed-thru
Power Required: 24W
LTC 9440 Series Load Rating:
40lb Load (18kg), 260lb-in (297kg-cm) torque
Wiring: Standard
Power Required: 20W
LTC 9441 Series Load Rating:
40lb Load (18kg), 260lb-in (297kg-cm) torque
Wiring: Feed-thru
Power Required: 20W
Rated Motor Voltage
Voltage Range
/60 models*:
120VAC, 60Hz
108 to 132
/20 models*:
24VAC, 60Hz
21.6 to 26.4
* 40lb Models
24VAC, 60Hz
23 to 26.4
/10 models:
24VAC, 50Hz
21.6 to 26.4
/50 models:
220VAC, 50Hz
207 to 253
Pan Range: 0° to 345° on standard models, 0° to 360° on
Continuous Pan models. Pre-position is designated as -/x1, e.g.,
LTC 9441/61