Bosch MIC-WKT User Manual
MIC-WKTI and MIC-WKT-IR Installation Manual
EN | 4
Bosch Security Systems
Issue 1
Safety Precautions
The following symbols are used throughout this manual please pay careful
attention to their meaning.
attention to their meaning.
Important Safety Instructions
1.
Read all instructions prior to installation.
2.
Keep this manual for future reference.
3.
Heed all warnings.
4.
Install according to manufacturer’s instructions.
5.
Qualified persons only should install this product, if in doubt consult a qualified
installer.
6.
Use correct electrostatic discharge handling procedures when handling printed
circuit boards to avoid damage to electro-sensitive components.
7.
Do not install near any strong heat sources such as furnaces.
8.
Never push objects or pour liquids into the product enclosure as this can cause a
fire or electrical shock hazard.
9.
Only use electronic cleaning solvent in the unlikely event of the card requiring
cleaning.
10.
Ensure that the product is correctly earthed.
11.
Use only the power sources indicated in this user guide and ensure that the
current rating of the supply cable is adequate for the product.
12.
Do not overload power supply sockets as this can be a fire or electrical shock
hazard.
13.
In the event of failure do not attempt to service this product yourself, please
contact Bosch Security Systems for assistance.
14.
Only use approved attachments or accessories specified by the manufacturer. Any
changes or modifications made to the equipment, not expressly approved in writing
by Bosch Security Systems, could prevent proper or safe operation of the product
and will invalidate the warranty.
by Bosch Security Systems, could prevent proper or safe operation of the product
and will invalidate the warranty.
15.
Please dispose of disused electrical & electronic equipment at an environmentally
compatible recycling facility (contact Bosch Security Systems for further details).
The lightning flash with an arrowhead symbol within a
triangle is intended to alert the user to the presence of non-
insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
triangle is intended to alert the user to the presence of non-
insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within a triangle is intended to alert
the user to the presence of important safety, operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
the user to the presence of important safety, operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DISCONNECT POWER SUPPLY BEFORE OPENING THE
POWER SUPPLY UNIT.
POWER DISCONNECT: POWER SUPPLY UNITS HAVE
POWER SUPPLIED WHENEVER THE POWER CORD IS
INSERTED INTO THE POWER SOURCE
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DISCONNECT POWER SUPPLY BEFORE OPENING THE
POWER SUPPLY UNIT.
POWER DISCONNECT: POWER SUPPLY UNITS HAVE
POWER SUPPLIED WHENEVER THE POWER CORD IS
INSERTED INTO THE POWER SOURCE
WARNING
INSTALLATION SHOULD BE CARRIED OUT BY
QUALIFIED PERSONNEL ONLY IN ACCORDANCE
WITH THE APPLICABLE LOCAL CODES.
BOSCH SECURITY SYSTEMS ACCEPTS NO LIABILITY
FOR ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY
QUALIFIED PERSONNEL ONLY IN ACCORDANCE
WITH THE APPLICABLE LOCAL CODES.
BOSCH SECURITY SYSTEMS ACCEPTS NO LIABILITY
FOR ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION