Bosch PLE-10M2-US User Manual

Page of 34
Bosch Security Systems | 2008-04 | PLE-10M2-US en
Plena Easy Line Mixer | Installation and User Instructions | Description
 en | 12
2.4.3
Rear panel
See figure 2.3 for an overview of the connectors and 
switches:
1 Microphone/line 1 input with trigger, Euro style 
pluggable screw terminal connector - DIP switch 
settings for: chime, PTT (push to talk), mic/line, 
speech filter, and phantom power (see number 2).
2 DIP switch for microphone/line 1 and microphone/
line 2 (see numbers 1 and 3, respectively).
3 Microphone/line 2 input, Euro style pluggable screw 
terminal connector - DIP switch settings for speech 
filter, mic/line, VOX, and phantom power (see 
number 2).
4 Microphone/line 3 input, Euro style pluggable screw 
terminal connector - DIP switch settings for mic/line, 
and phantom power (see number 5).
5 DIP switch for microphone/line 3 and microphone/
line 4 (see numbers 4 and 6 respectively).
6 Microphone/line 4 input, Euro style pluggable screw 
terminal connector - DIP switch settings for mic/line, 
and phantom power (see number 5).
7 Microphone/line 5 input, Euro style pluggable screw 
terminal connector - DIP switch settings for mic/line, 
and phantom power (see number 8).
8 DIP switch for microphone/line 5 and microphone/
line 6 (see numbers 7 and 9 respectively).
9 Microphone/line 6 input, Euro style pluggable screw 
terminal connector - DIP switch settings for mic/line, 
and phantom power (see number 8).
10 Mains voltage switch, C13 - 115/230 
VAC 50/60 Hz.
11 Tel. emergency/70V input, Euro style pluggable 
screw terminal connector - VOX function. This input 
has highest priority.
12 Telephone emergency/70V input volume control - 
control range -25 dB to 0dB (see number 11).
13 Chime volume control for microphone/line input 1 
(see number 1).
14 Ducking level control for microphone/line inputs 1 
and 2.
15 Call station input, RJ-45 connector - PLE-2CS or 
PLE-2CSMM, chimes are in call station. This input 
has second highest priority.
16 Remote control wall-panel-input, RJ-45 connector. 
Wall panel incorporates: BGM source selection, and 
zone on/off control.
17 Music input (number 1 disc), 2x RCA/cinch 
connectors. Stereo, summed mono.
18 Music input (number 2 radio), 2x RCA/cinch 
connectors. Stereo, summed mono.
19 Music input (number 3 auxiliary), 2x RCA/cinch 
connectors. Stereo, summed mono.
20 Pre-out, amp in insert, 2x RCA/cinch connector - 
can be used for EQ or feedback suppressor.
21 Master switch for line out or music (see number 22).
22 Music master output, Euro style pluggable screw 
terminal connector - switch setting for line out, or 
music only (see number 21).
23 24 VDC input and volume override output:
24 VDC backup power input - Euro style pluggable 
screw terminal connector.
Volume override output - Euro style pluggable screw 
terminal connector.
24 Zone 1 output, Euro style pluggable screw terminal 
connector, balanced.
25 Zone 2 output, Euro style pluggable screw terminal 
connector, balanced.
26 Mains fuse.
27 Ground connection screw.
28 Mains connector (3-pole).
Note
The unit must be grounded.