Bosch ICP-CC404 User Manual

ICP-CC404 | Installation Guide | 6.0

System Functions

32 Bosch

Security

Systems,

Inc. | 12/08 | F01U089401-02

The default Master Code is 2580 and is
User Code 1. You can program multiple
Master Codes. Refer to Section 13.3
User Code Priority on page 52 for more
information.

To access a Master Code function, enter the Master
Code and press the corresponding function digit and
the [AWAY] button. The Master Code functions are
listed in Table 25.

Table 25:

Master Code Functions

Function Description

Reserved

Add, change, and delete User
Codes/Remote Radio User Codes
(Sections 6.2.1 on page 32 and 6.2.2 on
page 32)

Change domestic phone numbers
(Section 6.2.3 on page 33)

Change Telco Arm or Disarm Sequence
(Section 6.2.4 on page 34)

Set zones for STAY Mode 2
(Section 6.2.5 on page 35)

Turn outputs on and off
(Section 6.2.6 on page 36)

Set the date and time
(Section 6.2.7 on page 36)

7 Walk

Test

Mode

(Section 6.2.8 on page 36)

Event Memory Recall Mode
(Section 6.2.9 on page 36)

9 Reserved

6.2.1

Changing and Deleting User Codes

This function allows a Master Code holder to change
or delete a User Code.
1. Enter your Master Code and press [1][AWAY].

Three beeps sound and the STAY and AWAY
indicators flash.

2. Enter the number of the code (1 to 8) you want to

change and press [AWAY].
Two beeps sound and the corresponding zone
indicator lights.

3. Enter the new code and press [AWAY].

Two beeps sound and the STAY and AWAY
indicators turn off.

4. Repeat this procedure to change other User

Codes.

This function ends automatically if you do
not press a button within 60 sec or if you
press [AWAY].

One long beep indicates that the code
already exists or that you entered an
incorrect user number.

Example

To program User Code number 2 as 4627, enter:

[2 5 8 0 1][AWAY][2][AWAY][4 6 2 7][AWAY]

To delete a User Code:
1. Enter your Master Code and press [1][AWAY].

Three beeps sound and the STAY and AWAY
indicators flash.

2. Enter the number of the code (1 to 8) you want to

delete and press [AWAY].
Two beeps sound and the corresponding zone
indicator lights.

3. Press [STAY] to delete the User Code.

Two beeps sound and the STAY and AWAY
indicators turn off.

4. Repeat this procedure to delete other User

Codes.

This function ends automatically if you do
not press a button within 60 sec or if you
press [AWAY].

One long beep indicates that the code
already exists or that you entered an
incorrect user number.

Example

To delete user code number 3, enter:

[2 5 8 0 1][AWAY][3][AWAY][STAY]

6.2.2

Changing and Deleting Remote Radio User
Codes

This function allows a Master Code holder to change
or delete a remote radio User Code.

To add or change a remote radio User Code:
1. Enter your Master Code and press [1][AWAY].

Three beeps sound and the STAY and AWAY
indicators flash.

2. Enter the number of the code (9 to 16) you want

to change and press [AWAY].
Two beeps sound and the corresponding codepad
indicators light. Refer to Table 26.

Table 26:

Remote Radio Numbers Displayed by
the Codepad Indicators

User

Zone Indicators

MAINS

1 2 3 4 5 6 7 8 Indicator