Bosch ICP-CC404 User Manual
ICP-CC404 | Installation Guide | 19.0 Optional Equipment
Bosch Security Systems, Inc. | 12/08 | F01U089401-02
77
19.7 CP5 Eight Zone LCD Codepad
(CP508LW)
This codepad operates with the range of control
panels. This codepad has a fixed icon display and
provides indications for up to eight zones.
panels. This codepad has a fixed icon display and
provides indications for up to eight zones.
19.8 CP105A Night Arm Station
The night arm station has a panic button and allows
the user to arm and disarm the system in STAY
Mode 1 from a bedroom or sitting room. Enable the
night arm station to operate with the system by
selecting Option 8 in Location 427 (refer to Section
18.4 System Options 4 on page 74).
the user to arm and disarm the system in STAY
Mode 1 from a bedroom or sitting room. Enable the
night arm station to operate with the system by
selecting Option 8 in Location 427 (refer to Section
18.4 System Options 4 on page 74).
19.9 PS101 Power Supply Module
The PS101 Power Supply Module provides 13.8 VDC
at currents up to 1 A. Use the module with the TF008
18 VAC plug pack.
at currents up to 1 A. Use the module with the TF008
18 VAC plug pack.
The module provides standard, fully short-circuit
proof, power out, and battery charging terminals, and
a DC LED indicator. If the application requires an
uninterruptible power supply, a rechargeable sealed
lead-acid battery can be installed. If there is a mains
failure, the power supply switches to battery power
without interrupting the supply to the load.
proof, power out, and battery charging terminals, and
a DC LED indicator. If the application requires an
uninterruptible power supply, a rechargeable sealed
lead-acid battery can be installed. If there is a mains
failure, the power supply switches to battery power
without interrupting the supply to the load.
19.10 TF008 Plug Pack (TF008)
The TF008 plug pack is used with control panels. The
plug pack includes built-in thermal fuses that blow
during overload or fault conditions to eliminate a
possible fire threat due to excessive heat buildup
inside the casing.
plug pack includes built-in thermal fuses that blow
during overload or fault conditions to eliminate a
possible fire threat due to excessive heat buildup
inside the casing.
The plug pack incorporates a three-wire flying lead
that enables a mains earth connection between the
equipment and the plug pack. This connection might
be required for lightning protection on equipment
connected to phone lines or for safety reasons such as
earthing of metal enclosures.
that enables a mains earth connection between the
equipment and the plug pack. This connection might
be required for lightning protection on equipment
connected to phone lines or for safety reasons such as
earthing of metal enclosures.