Bosch FW5.50 User Manual

Camera Browser Interface

Recording | en

Bosch Security Systems

Software manual

AM18-Q0611 | v5.50 | 2012.03

Standard and alarm recording can be defined for the two 

recording tracks. You must first select the track before setting 

up the standard and alarm recording parameters.

1.

Click the Recording 1 entry in the list.

2.

Set up the standard and alarm recording parameters for 

track 1 as described below.

3.

Click the Recording 2 entry in the list.

4.

Set up the standard and alarm recording parameters for 

track 2 as described below.

Select the mode for standard recordings:

–

Continuous: the recording proceeds continuously. If the 

maximum recording capacity is reached, older recordings 

are overwritten automatically.

–

Pre-alarm: recording takes place in the pre-alarm time, 

during the alarm and during the post-alarm time only.

–

Off: no automatic recording takes place.

Select the stream to be used for standard recordings: 

–

–

–

Select a period for the Pre-alarm time from the list box.

Select a period for the Post-alarm time from the list box.

Select the stream to be used for alarm recordings: 

–

–

–