Bosch D623 User Manual

D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52) 

. 

 

Bosch Security Systems | 9/04 | 46841E 

27 

 

Off Skeds 

Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to 
4. 
5.

 

The keypad scrolls all skeds that turn the system 
off. Press the number key of  the sked you want to 
change followed by [*]. 

 

6.

 

Enter the time for the system to automatically turn 
off (HH:MM). In this example, program Sked 4 in 
Area 3 to turn off at 7:00 a.m. 

 

7.

 

The second line displays the days as programmed 
by your security company. Enter the days for the 
system to automatically turn All On (Sunday = 1, 
Saturday = 7, and all days = 8). In this example, 
suppose your security company programmed the 
sked for Monday, Tuesday, Wednesday, Thursday, 
and Friday. 

 

8.

 

You want to add Saturday. To add Saturday, press 
[7]. 

 

9.

 

You now decide that you do not want this sked to 
activate on Monday. To remove Monday, press 
[2]. 

 

10.

 

Press [CMD] when you are done changing the 
sked. 

Output On Skeds 

 

 

This section is intended for turning 
outputs on. 

 

 Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 
to 4. 
5.

 

The keypad scrolls all skeds that turn the outputs 
on. Press the number key of the sked you want to 
change followed by [*]. 

 

6.

 

Enter the time for the system to automatically 
operate Output 01 (HH:MM). In this example, 
Sked 5 is set for 12:00 a.m. 

 

7.

 

The second line displays the days as programmed 
by your security company. Enter the days for the 
system to automatically turn All On (Sunday = 1, 
Saturday = 7, and all days = 8). In this example, 
suppose your security company programmed the 
sked for Monday, Tuesday, Wednesday, Thursday, 
and Friday. 

 

8.

 

You want to add Saturday. To add Saturday, press 
[7]. 

 

9.

 

You now decide that you do not want this sked to 
activate on Monday. To remove Monday, press 
[2]. 

 

10.

 

Press [CMD] if you are done changing the sked. 

Output Off Skeds 

 

 

This section is intended for turning 
outputs off. 

 

Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to 
4. 
5.

 

The keypad scrolls all skeds that turn the outputs 
off. Press the number key of the sked you want to 
change followed by [*]. 

 

6.

 

Enter the time for the system to automatically 
operate Output 01 (HH:MM). In this example, 
Sked 5 is set for 1:00 a.m. 

 

7.

 

The second line displays the days as programmed 
by your security company. Enter the days for the 
system to automatically turn All On (Sunday = 1, 
Saturday = 7, and all days = 8).  In this example, 
suppose your security company programmed the 
sked for Monday, Tuesday, Wednesday, Thursday, 
and Friday. 

 

8.

 

You want to add Saturday. To add Saturday, press 
[7].