Bosch D625 User Manual
D623 Series/D625 Series | User's Guide | Change Others’ Passcodes (Cmd 56)
.
Bosch Security Systems | 9/04 | 46841E
17
Change Others’ Passcodes
(Cmd 56)
I can perform this command.
I cannot perform this command.
Use this command to change passcodes for each user
in the system. This command requires the appropriate
authority level to change passcodes.
in the system. This command requires the appropriate
authority level to change passcodes.
Only use this
feature under the direction of your security
company.
company.
Cmd 56 is only for changing passcodes
other than the one used to access Cmd
56. For example, if User 1 performs Cmd
56, he/she cannot modify his/her own
passcode. Use Cmd 55 instead.
other than the one used to access Cmd
56. For example, if User 1 performs Cmd
56, he/she cannot modify his/her own
passcode. Use Cmd 55 instead.
1.
Ensure that the system is turned off (On indicator
is off).
is off).
2.
Press [CMD] [5] [6]. The keypad may prompt you
to enter a valid passcode.
to enter a valid passcode.
3.
Enter your passcode if necessary. The keypad
scrolls through the available options. If an option is
not selected after the list cycles once, the keypad
automatically exits this command.
scrolls through the available options. If an option is
not selected after the list cycles once, the keypad
automatically exits this command.
4.
Press [1] to change passcodes. The keypad scrolls
through all passcodes that are available for
changing.
through all passcodes that are available for
changing.
To change code 2
press 2*.
press 2*.
To change code 3
press 3*.
press 3*.
Push Cmd to exit
5.
Enter the passcode number (1 to 32) you want to
change followed by [*]. For example, press [2] [*]
to change Passcode 2. The keypad prompts you to
enter the new passcode.
change followed by [*]. For example, press [2] [*]
to change Passcode 2. The keypad prompts you to
enter the new passcode.
Please enter new
code 2.
code 2.
If the user does not exist in the system,
the keypad emits an error tone.
the keypad emits an error tone.
6.
Enter the new passcode with the same number of
digits as the old passcode. If the error tone sounds,
try a different new passcode.
digits as the old passcode. If the error tone sounds,
try a different new passcode.
7.
If you have entered a valid new passcode, the
keypad prompts you to enter the new passcode
again.
keypad prompts you to enter the new passcode
again.
Please enter new
code 2 again.
code 2 again.
8.
Enter the new passcode again.
9.
The keypad displays the following to confirm the
passcode change.
passcode change.
Code 2 changed.
10.
Repeat Steps 4 through 9 to change another
passcode or press [CMD] to exit this feature.
Pressing [CMD] again returns to the normal
display.
passcode or press [CMD] to exit this feature.
Pressing [CMD] again returns to the normal
display.
Change Others’ Passcode
Authority Levels (Cmd 56)
I can perform this command.
I cannot perform this command.
Use this command to change passcode authority levels
for each user in the system. This command requires the
appropriate authority level to change passcodes. You
cannot change your own passcode authority level.
Only use this feature under the direction of your
security company. The following is filled in by your
security company.
for each user in the system. This command requires the
appropriate authority level to change passcodes. You
cannot change your own passcode authority level.
Only use this feature under the direction of your
security company. The following is filled in by your
security company.
•
Authority Level 1 includes these commands:
____________________________________________
__________________________________________
____________________________________________
__________________________________________
•
Authority Level 2 includes these commands:
____________________________________________
__________________________________________
____________________________________________
__________________________________________
•
Authority Level 3 includes these commands:
____________________________________________
__________________________________________
____________________________________________
__________________________________________
•
Authority Level 4 includes these commands:
____________________________________________
__________________________________________
____________________________________________
__________________________________________
1.
Ensure that the system is turned off (On indicator
is off).
is off).
2.
Press [CMD] [5] [6]. The keypad may prompt you
to enter a valid passcode.
to enter a valid passcode.
3.
Enter your passcode if necessary. The keypad
scrolls the following:
scrolls the following:
Push 1 to change
codes.
codes.
Push 2 to change
authority level.
authority level.