Bosch 9 6 BLCC110U User Manual

Solution 64

Bosch Security Systems 09/06 BLCC110U

User Guide

System > System Testing >

Walk Test All Zones

MENU 7-9-0

This menu allows you to test all zones within an area at the same
time.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [9] + [0].

The keypad will display a list of areas that are available to
walk test zones.

2. Use the [

↑] and [↓] keys to select the area that you want to

do walk test, then press [OK] to select. Alternatively, you
can enter the area number, then press [OK].

The keypad will scroll all zones that you can test.

To test Z001
open then close
Zone 1 Name

Press OK or MENU

To test Z002
open then close
Zone 1 Name

Press OK or MENU

3. Open and close each zone that needs to be tested. A

zone that has been successfully tested will no longer
scroll on the keypad display.

When all zones have been tested, the keypad will display:

Selected zones have been
Tested OK

Press OK or MENU

4. Press [OK] to save and exit, or press [MENU] to exit

without saving.

System > System Testing >

Battery Test

MENU 7-9-1

This  menu  allows  you  to  manually  test  the  systems  back  up
battery.  The Solution 64 will automatically test the battery once
per day and every time the system is armed.
The battery test can take up to two minutes to complete and the
keypad will display the voltage of the battery during the test.
Enter programming mode (PIN + MENU) then,
1.  Press [MENU] + [7] + [9] + [2].

The keypad will display the battery voltage whilst under
test:

Battery test in progress.
Please wait..

Voltage = 13.4V

To Go Back Press OK

If the battery has passed the test, the keypad will display:

Battery test Passed.
Press OK to continue

If the battery has failed the test, the keypad will display:

Battery test Failed.
Please Call for Service.
Press OK to continue

2. Press [OK] to exit.