Bosch D1265 User Manual

D1265 | Owner's Manual | Part III: Advanced Commands 

 

 

Bosch Security Systems, Inc. | 9/10 | F01U169130-02 

33

 

Unbypass A Point (CMD + 0 + 0) 

Description 

Unbypassing a point is a way to return a bypassed 
point to the security system so that it can once again 
respond to trouble and alarm conditions. 

Using Unbypass a Point 

1.  Ensure the display shows disarmed idle text. 

2.  Press the 

CMD button. The display shows 

*System Command*. 

 

3.  Press the 

0 button twice. 

 

 

If you prefer, you might use the function 
list in place of Steps 2 and 3 to initiate 
this function. 

Press the Menu button to enter the 
function list. 

Press the Next button repeatedly. 

When you reach the Unbypass a Point 
button, press it. 

 

4.  You might be prompted for your passcode. It 

appears on the display as asterisks (*). 

 

5.  The display changes to show 

Enter point 

number or press next key. 

 

6.  If digits are pressed, the display shows 

Enter 

point number: #. As soon as a digit button is 
pressed, the display changes to 

Entering point 

number (# is the point number that was 
entered). 

 

If you know the point number you wish to 
unbypass, enter the number and press the 
ENTER button. 
If you don’t know the number of the point you 
wish to unbypass, you can view the list of 
devices that can be unbypassed by pressing the 
Next button. 
Continuously pressing 

Next scrolls through the 

available points that are currently bypassed. 
When the point text of the point you wish to 
unbypass appears, press the 

Unbypass button. 

 

One of the following messages shows (P3 
ENTRY DELAY is used here as an example): 
P3 ENTRY DELAY is now bypassed indicates 
the point was successfully bypassed. 

 

Invalid point Please try again indicates that 
the entered point doesn’t exist and the display 
returns to allow another point to be entered.