Bosch 3.5 User Manual
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
en | 329
41.3
Add a user
Proceed as follows to add a new user (i.e. create a new
account):
account):
1 Go to Configure > User management > Add. A screen
similar to the one in figure 41.2 appears in the main
frame of the web interface.
frame of the web interface.
2 Enter the user name for the new user in the User id
field. It can contain up to 16 characters. For example,
johndoe (see figure 41.3).
johndoe (see figure 41.3).
3 Select the authorization level for the new user in the
Group column. The authorization level defines to
which part of the Praesideo web interface access is
granted (see section 41.2).
which part of the Praesideo web interface access is
granted (see section 41.2).
4 Enter the password for the new user in the Password
field. It can contain up to 16 characters. For example,
password (see figure 41.3).
password (see figure 41.3).
5 Click the OK button to activate the new account. A
screen similar to the one in figure 41.4 appears in the
main frame of the web interface.
main frame of the web interface.
Note
Only Administrators can create new accounts.
Only Administrators can create new accounts.
figure 41.2: Add user, step 1
Note
Use a password of at least 5 characters. It is
Use a password of at least 5 characters. It is
important that a password is not easy to guess,
since it safeguards unauthorized access to the
system that could result in unsafe system
configuration.
figure 41.3: Add user, step 2 - 4
figure 41.4: Add user, step 5
Note
If the user account is used to control access to
If the user account is used to control access to
a call station that has a numeric keypad, the
user name and password can only contain digits
(0...9), because the keypad does not have
alphabetic keys (a...z).