Bosch 3.5 User Manual
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
en | 381
46
Call characteristics
46.1 Introduction
Using the Call characteristics pages, call macros can be
defined (see section 43.2).
defined (see section 43.2).
46.2 Call
macro
46.2.1 Introduction
On the Call macro page, call macros can be defined. Call
macros are used to make calls.
macros are used to make calls.
46.2.2 Create a call macro
Proceed as follows to create a new call macro:
1 Go to Configure > Call characteristics > Call macro. A
1 Go to Configure > Call characteristics > Call macro. A
screen similar to the one in figure 46.2 appears in the
main frame of the web interface.
main frame of the web interface.
2 Click the Add button to add a new call macro. A
screen similar to the one in figure 46.3 appears in the
main frame of the web interface.
main frame of the web interface.
3 Enter the name of the new call macro in the Name
field (see figure 46.4 for an example). It may consist
of up to 16 characters.
of up to 16 characters.
4 Click the OK button to add the call macro to the list
of call macros in the system. A screen similar to the
one in figure 46.5 appears in the main frame of the
web interface.
one in figure 46.5 appears in the main frame of the
web interface.
figure 46.1: Call characteristics pages
figure 46.2: Add call macro, step 1
Call characteristics
Call macro
figure 46.3: Add call macro, step 2
figure 46.4: Add call macro, step 3