Bosch 3.5 User Manual
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software
en | 455
57.5 Configuration
Proceed as follows to configure the Logging Viewer:
1 Go to File > Options. A screen similar to the one in
1 Go to File > Options. A screen similar to the one in
figure 57.3 appears.
2 Enter the IP address of the PC on which the Logging
Server is running to which the Logging Viewer must
connect.
A server host name can be used instead of an IP
address if the IP address was automatically provided
by a DNS server, or if the IP address of the PC is
stored in the Windows host file
(WINNT\system32\drivers\etc.). This file can be edited
using Notepad.
connect.
A server host name can be used instead of an IP
address if the IP address was automatically provided
by a DNS server, or if the IP address of the PC is
stored in the Windows host file
(WINNT\system32\drivers\etc.). This file can be edited
using Notepad.
figure 57.3: Options window
Note
If the name of the PC is used, the IP address of
If the name of the PC is used, the IP address of
the PC must be stored in the Windows hosts
file (WINNT\system32\drivers\etc.). This file
can be edited with Notepad.
Note
If the Logging Viewer is installed on the same
If the Logging Viewer is installed on the same
PC as the Logging Server, it is allowed to use
Localhost as server name in the Options
window.